TPU covered – Hyper flow
With high adhesion strength and top fatigue resistance performance.EPDM inner tube provides extreme chemical resistance comparing with other commonly used such as TPU, Nitrile, PVC.
- TPU cover provides extreme abrasion resistance, that adaptable to various working conditions.
- Outstanding diameter stability with high restored rate after be pressured then depressured.
- Lager volume transfer capability of liquid.
- Lighter, softer for being deployed.
- This hose is made from thermoplastic polyether based polyurethane(TPU) covered and EPDM lined by high pressure around a circular woven jacket made from high tenacity filament polyester yarn.
- Color: Black, other colors on request
- Couplings: Storz, Camlock, other couplings on request
- Standard Length: 50′(15m), 100′(30m), 300’(90m), other length on your request.
Technical Data
I.D. | Service Test Pressure | Burst Pressure | |
---|---|---|---|
Inch | mm | Bar/Psi | Psi |
1-1/2” | 38 | 21/300 | 63/900 |
1-3/4” | 45 | 17/250 | 51/750 |
2” | 52 | 17/250 | 51/750 |
2-1/2” | 65 | 17/250 | 51/750 |
3” | 76 | 17/250 | 51/750 |
4” | 102 | 17/250 | 51/750 |
5” | 127 | 15/225 | 45/675 |
6” | 152 | 15/225 | 45/675 |
8” | 200 | 10/150 | 30/450 |
Maximum recommended working pressure:50% of the listed values of Burst pressure for temporary use. To obtain maximum lifetime of the hose, it is recommended that the working pressure or the working tensile stress do not exceed 1/3 of the listed values.