Mill Hose – MRS Series
5Elem Mill Hose-MRS is rubber lined and single jacketed product which is thinner than Mill Hose-MTS. MRS mill discharge hoses are economical and easy to handle.
- The jacket shall be evenly and firmly woven and free from visible defects, thread knots, lumps and irregularities of twist.
- The warp will consist of high strength staple (spun) polyester yarns.
- The weft / filler will be high strength, low elongation filament polyester.
- Cover is weather ozone, oxidation UV, and most chemicals or petroleum products resistant. Jacket is plain.
- Polyester single jacket, rubber liner.
- Color: White, other color on request. A color strip can be added on the jacket,please inquiry before placing order.
- Couplings: Aluminum & Brass NPSH / NST / IPT expansion ring threaded coupling,Aluminum Storz, instantaneous BS or other type of couplings on request.
- Standard Length: 50′(15m), 75’(23m), 100′(30m), 200’(60m).
Technical Data
I.D. | Service Test Pressure | Burst Pressure |
---|---|---|
Inch | Psi | Psi |
1” | 150,200,250,300 | 450,600,750,900 |
1-2/2” | 150,200,250,300 | 450,600,750,900 |
1-3/4” | 150,200,250,300 | 450,600,750,900 |
2” | 150,200,250,300 | 450,600,750,900 |
2-1/2” | 150,200,250,300 | 450,600,750,900 |
3” | 150,200 | 450,600 |
4” | 125,150 | 375,450 |
5” | 125,150 | 375,450 |
6” | 125,150 | 375,450 |